Pressure Reducing Valve for Water
RD-45 Pressure Reducing Valve with Stop Valve for water
RD-45SN type M |
20 |
Water and hot water |
5 - 90 Deg.C (In using core at connection, applicable temperature will be 5 - 40 Deg.C) |
Max. 1.0MPa |
0.05 - 0.12MPa |
0.11 - 0.23MPa |
0.22 - 0.30MPa |
50 l/min (pressure differential across the disc is over 0.1MPa) |
10 : 1 |
0.02MPa |
Body : Cast bronze Diaphragm and Disc : Synthetic rubber |
Screwed JIS Rc |
|
RD-44N Pressure Reducing Valve for water
RD-44N type MP
RD-44N type MB |
20 |
Water and hot water |
5 - 90 Deg.C (In using core at connection applicable temperature will be 5 - 40 Deg.C) |
Max. 1.0MPa |
0.05 - 0.12MPa |
0.11 - 0.23MPa |
0.22 - 0.30MPa |
50 l/min(pressure differential across the disc is over 0.1MPa) |
10 : 1 |
0.02MPa |
Body : Cast bronze, Diaphragm and Disc : Synthetic rubber |
P(Male unions) : Screwed JIS R3/4 B(Female unions with pipe end core) : Screwed JIS Rc3/4 C(Male union and female union) : Screwed JIS R3/4 |
Catalog |
|
RD-31N, 31FN, 33FN Cast bronze, Direct operating type Pressure Reducing Valve
RD-31 - 33 series |
15 - 50 |
25 - 50 |
65 - 150 |
Water, hot water, air and inert gases |
5 - 90 Deg.C ( In using core at connection, applicable temperature will be 5 - 40 Deg.C) |
Max. 1.0MPa |
Spring range |
L : 0.05 - 0.35MPa |
|
H : 0.3 - 0.7MPa |
over size 125 mm : 0.3 - 0.5MPa |
|
10 : 1 |
0.05MPa |
Body : Cast bronze Diaphragm and Disc : NBR |
Screwed JIS Rc |
Flanged JIS 10KFF |
Catalog |
|
RDB-33FN Cast bronze, Direct operating type Pressure Reducing Valve with bypass
|
20 - 100 |
Water, hot water |
5 - 90 Deg.C |
Max. 1.0MPa |
Spring range |
L : 0.05 - 0.35MPa |
|
H : 0.3 - 0.7MPa |
|
10 : 1 |
0.05MPa |
Body : Cast bronze Diaphragm and Disc : NBR |
Size 20, 25 : Loose Flanged JIS 10K Size 32 - 100 : Flanged JIS 10KFF |
|
RD-35 Stainless steel, Direct operating type Pressure Reducing Valve
RD-35 |
25 - 40 |
25 - 100 |
Water, hot water, air and inert gases |
5 - 90 Deg.C |
Max. 1.0MPa |
Spring range |
L : 0.05 - 0.35MPa |
|
H : 0.3 - 0.7MPa |
|
10 : 1 |
0.05MPa |
Body and trim : Stainless steel Disc and Diaphragm : NBR |
Screwed JIS Rc |
Flanged JIS 10KFF |
Catalog |
|
RD-20 Stainless steel, Direct operating type Pressure Reducing Valve
RD-20 |
15 - 25 |
Water, liquids, air or gases |
5 - 60 Deg.C |
Max. 2.0MPa |
Spring range L : 0.02 - 0.12MPa, M : 0.1 - 0.3MPa, H : 0.25 - 0.5MPa |
Water, liquids: 10 : 1 Air, gases: 20 : 1 |
0.05MPa |
Body : Stainless steel Diaphragm and Disc : NBR |
Screwed JIS Rc or Flanged JIS 10K RF |
Catalog |
|
RD-14 Cast iron, Direct operating type Pressure Reducing Valve
RD-14W |
15 - 150 |
Water, hot water, and air |
Water, hot water |
Oils not corrosive, kerosene, lubricant, heavy oil A and B, and hot water. |
5 - 60 Deg.C |
5 - 90 Deg.C |
Max. 1.0MPa |
Size 20 - 80mm : |
0.05 - 0.35MPa |
|
0.3 - 0.7MPa |
Size 100 - 150mm : |
0.05 - 0.35MPa |
|
0.3 - 0.5MPa |
|
10 : 1 |
0.05MPa |
- |
Under 800cSt |
Cast iron (Interior : Epoxy resin Exterior : Metallic blue) |
Cast iron(Inside & outside : Nylon 11 coating) |
Cast iron |
Disc and Seat : Cast bronze Disc and Diaphragm : Synthetic rubber |
Flanged JIS 10KRF |
Catalog |
|
RD-7 Direct operating type Pressure Reducing Valve
|
10 & 15 |
Fuel oils |
5 - 120 Deg.C |
Max. 1.0MPa |
0.01 - 0.08, 0.08 - 0.2, 0.2 - 0.3MPa |
20 : 1 |
0.05MPa |
700cSt or less |
Body : Cast iron, ( interior : Epoxy resin ) Trim : Cast bronze Diaphragm and Disc : Synthetic rubber |
Screwed JIS Rc |
Catalog |
|
WVR-02 Cast iron, pilot type Pressure Reducing Valve
WVR-02 |
40 - 400 |
250 - 400 |
40 - 200 |
Water and hot water |
5 - 60 Deg.C |
Max. 1.0MPa |
Max. 1.6MPa |
0.05 - 0.35MPa |
0.05 - 0.35MPa |
0.3 - 0.95MPa |
0.3 - 0.7MPa |
0.3 - 1.0MPa |
10 : 1 |
0.05MPa |
Body : Cast iron, ( Interior : Epoxy resin ) Trim : Cast bronze Diaphragm and Disc : Synthetic rubber |
Flanged JIS 10RF |
Flanged JIS 16KRF |
Catalog |
|